Lucene search

K
securityvulnsSecurityvulnsSECURITYVULNS:DOC:15374
HistoryDec 12, 2006 - 12:00 a.m.

Microsoft Security Bulletin MS06-073 Vulnerability in Visual Studio 2005 Could Allow Remote Code Execution (925674)

2006-12-1200:00:00
vulners.com
24

Microsoft Security Bulletin MS06-073
Vulnerability in Visual Studio 2005 Could Allow Remote Code Execution (925674)
Published: December 12, 2006

Version: 1.0
Summary

Who Should Read this Document: Customers who use Microsoft Visual Studio 2005

Impact of Vulnerability: Remote Code Execution

Maximum Severity Rating: Critical

Recommendation: Customers should apply the update immediately

Security Update Replacement: None

Caveats: Microsoft Knowledge Base Article 925674 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925674.

Tested Software and Security Update Download Locations:

Affected Software:

Microsoft Visual Studio 2005 — Download the update

Visual Studio 2005 Standard Edition

Visual Studio 2005 Professional Edition

Visual Studio 2005 Team Suite

Visual Studio 2005 Team Edition for Developers

Visual Studio 2005 Team Edition for Architects

Visual Studio 2005 Team Edition for Testers

Non-Affected Software:

Microsoft Visual Studio 2005

Visual Basic 2005 Express Edition

Visual C++ 2005 Express Edition

Visual C# Express Edition

Visual J# Express Edition

Visual Web Developer Express Edition

Visual Studio 2005 Tools For Office

Visual Studio 2005 Team Explorer

Visual Studio 2005 Team Foundation Dual-Server

Visual Studio 2005 Team Foundation Single Server

Visual Studio 2005 Team Foundation Proxy

Visual Studio 2005 Team Foundation Build

Visual Studio 2005 Premier Partner Edition

Microsoft Visual Studio 6.0 Service Pack 6

Microsoft Visual Studio .NET 2002 Service Pack 1

Microsoft Visual Studio .NET 2003 Service Pack 1

Note Not all versions of Visual Studio 2005 include the affected file. If you do not have wmiscriptutils.dll on your system you are not affected by this vulnerability.

The software in this list has been tested to determine whether the versions are affected. Other versions either no longer include security update support or may not be affected. To determine the support life cycle for your product and version, visit the Microsoft Support Lifecycle Web site.
Top of sectionTop of section
General Information

Executive Summary

Executive Summary:

This update resolves a public vulnerability. The vulnerability is documented in the "Vulnerability Details" section of this bulletin.

An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

We recommend that customers apply the update immediately.

Severity Ratings and Vulnerability Identifiers:
Vulnerability Identifiers Impact of Vulnerability Visual Studio 2005

WMI Object Broker Vulnerability - CVE-2006-4704

Remote Code Execution

Critical

Note By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode mitigates this vulnerability. See the FAQ section for this security update for more information about Internet Explorer Enhanced Security Configuration.

This assessment is based on the types of systems that are affected by the vulnerability, their typical deployment patterns, and the effect that exploiting the vulnerability would have on them.
Top of sectionTop of section

Frequently Asked Questions (FAQ) Related to This Security Update

What updates does this release replace?
This security update does not replace any prior security update.

Can I use the Microsoft Baseline Security Analyzer (MBSA) to determine whether this update is required?

The following table provides the MBSA detection summary for this security update.
Product MBSA 1.2.1 EST MBSA 2.0

Visual Studio 2005

No

Yes

Yes

For more information about MBSA, visit the MBSA Web site.

For more information about the programs that Microsoft Update and MBSA 2.0 currently do not detect, see Microsoft Knowledge Base Article 895660.

For more detailed information, see Microsoft Knowledge Base Article 910723.

What is the Enterprise Update Scan Tool (EST)?
As part of an ongoing commitment to provide detection tools for bulletin-class security updates, Microsoft delivers a stand-alone detection tool whenever the Microsoft Baseline Security Analyzer (MBSA) and the Office Detection Tool (ODT) cannot detect whether the update is required for an MSRC release cycle. This stand-alone tool is called the Enterprise Update Scan Tool (EST) and is designed for enterprise administrators. When a version of the Enterprise Update Scan Tool is created for a specific bulletin, customers can run the tool from a command-line interface (CLI) and view the results of the XML output file. To help customers better utilize the tool, detailed documentation will be provided with the tool. There is also a version of the tool that offers an integrated experience for SMS administrators.

Can I use a version of the Enterprise Update Scan Tool (EST) to determine whether this update is required?
Yes. Microsoft has created a version of EST that will determine if you have to apply this update. For download links and more information about the version of EST that is being released this month, see Microsoft Knowledge Base Article 894193. SMS customers should review the following FAQ, “Can I use Systems Management Server (SMS) to determine whether this update is required?" for more information about SMS and EST.

Can I use Systems Management Server (SMS) to determine whether this update is required?
The following table provides the SMS detection summary for this security update.
Product SMS 2.0 SMS 2003

Visual Studio 2005

Yes (With EST)

Yes

SMS 2.0 and SMS 2003 Software Update Services (SUS) Feature Pack can use MBSA 1.2.1 for detection and therefore have the same limitation that is listed earlier in this bulletin related to programs that MBSA 1.2.1 does not detect.

For SMS 2.0, the SMS SUS Feature Pack, which includes the Security Update Inventory Tool (SUIT), can be used by SMS to detect security updates. SMS SUIT uses the MBSA 1.2.1 engine for detection. For more information about SUIT, visit the following Microsoft Web site. For more information about the limitations of SUIT, see Microsoft Knowledge Base Article 306460. The SMS SUS Feature Pack also includes the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, visit the following Microsoft Web site. SMS 2003 can also use the Microsoft Office Inventory Tool to detect required updates for Microsoft Office applications.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723.

Can I use SMS to determine if other programs are installed that have to be updated?
Yes. SMS can help detect if there are other programs installed that may have installed a version of the vulnerable component. SMS can search for the existence of the file wmiscriptutils.dll. Update all versions of wmiscriptutils.dll that are earlier than version 8.0.50727.236.

What are the known issues that customers may experience when they install this security update?
Microsoft Knowledge Base Article 925674 documents the currently known issues that customers may experience when they install this security update. The article also documents recommended solutions for these issues. For more information, see Microsoft Knowledge Base Article 925674.
Top of sectionTop of section

Vulnerability Details

WMI Object Broker Vulnerability - CVE-2006-4704:

A remote code execution vulnerability exists in the WMI Object Broker control that the WMI Wizard uses in Visual Studio 2005.An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user viewed the Web page. An attacker who successfully exploited this vulnerability could take complete control of an affected system.

Mitigating Factors for WMI Object Broker Vulnerability - CVE-2006-4704:

In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or instant messenger message that takes users to the attacker's Web site.

By default, this ActiveX control is not included in the default allow-list for ActiveX controls in Internet Explorer 7. Only customers who have explicitly approved this control by using the ActiveX opt-in feature are at risk to attempts to exploit this vulnerability. However, if a customer has used this ActiveX control in a previous version of Internet Explorer, then this ActiveX control is enabled to work in Internet Explorer 7, even if the customer has not explicitly approved it using the ActiveX opt-in Feature.

An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.

By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.

By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.
Top of sectionTop of section

Workarounds for WMI Object Broker Vulnerability - CVE-2006-4704:

Microsoft has tested the following workarounds. Although these workarounds will not correct the underlying vulnerability, they help block known attack vectors. When a workaround reduces functionality, it is identified in the following section.

Disable attempts to instantiate the WMI Object Broker control

You can disable attempts to instantiate this ActiveX control in Internet Explorer by setting the kill bit for the control in the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.

To set the kill bit for a CLSID with a value of {7F5B7F63-F06F-4331-8A26-339E03C0AE3D} paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{7F5B7F63-F06F-4331-8A26-339E03C0AE3D}]
"Compatibility Flags"=dword:00000400

You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:

Group Policy collection

What is Group Policy Object Editor?

Core Group Policy tools and settings

Note: You must restart Internet Explorer for your changes to take effect.

Impact of Workaround: The WMI Wizard in Visual Studio 2005 may no longer display or function correctly.

Configure Internet Explorer to prompt before running ActiveX Controls or disable ActiveX Controls in the Internet and Local intranet security zone

You can help protect against this vulnerability by changing your Internet Explorer settings to prompt before running ActiveX controls. To do this, follow these steps:

In Internet Explorer, click Internet Options on the Tools menu.

Click the Security tab.

Click Internet, and then click Custom Level.

Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.

Click Local intranet, and then click Custom Level.

Under Settings, in the ActiveX controls and plug-ins section, under Run ActiveX controls and plug-ins, click Prompt or Disable, and then click OK.

Click OK two times to return to Internet Explorer.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

Repeat these steps for each site that you want to add to the zone.

Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are ".windowsupdate.microsoft.com" and “.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.

To raise the browsing security level in Microsoft Internet Explorer, follow these steps:

On the Internet Explorer Tools menu, click Internet Options.

In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Impact of Workaround: There are side effects to prompting before running ActiveX controls. Many Web sites that are on the Internet or on an intranet use ActiveX to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX controls is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX controls. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

Repeat these steps for each site that you want to add to the zone.

Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are ".windowsupdate.microsoft.com" and “.update.microsoft.com” (without the quotation marks). These are the sites that will host the update, and it requires an ActiveX Control to install the update.
Top of sectionTop of section

FAQ for WMI Object Broker Vulnerability - CVE-2006-4704:

What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights.

What causes the vulnerability?
Improper validation of controls instantiated by WMI Object Broker causes the vulnerability.

What is WMI Object Broker?
WMI Object Broker is an ActiveX control that the WMI Wizard uses in Visual Studio 2005. When a user invokes the WMI Wizard feature of Visual Studio 2005, the wizard internally uses WMI Object Broker to instantiate other controls.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

Who could exploit the vulnerability?
In a Web-based attack scenario, an attacker would have to host a Web site that contains a Web page that is used to attempt to exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to persuade them to visit the Web site, typically by getting them to click a link that takes them to the attacker's site.

What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems that have Visual Studio 2005 installed where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.

I am running Internet Explorer 7. Does this mitigate this vulnerability?
Yes. Customers who are running Internet Explorer 7 with default settings, are not at risk until the WMI Object Broker control has been activated through the ActiveX opt-in feature in the Internet Zone. However, if a customer has used this ActiveX control in a previous version of Internet Explorer, then this ActiveX control is enabled to work in Internet Explorer 7, even if the customer has not explicitly approved it using the ActiveX opt-in feature.

What is the ActiveX opt-in feature in Internet Explorer 7?
Internet Explorer 7 includes an ActiveX opt-in feature, which means that nearly all pre-installed ActiveX controls are off by default. Users are prompted by the Information Bar before they can access a previously installed ActiveX Control that has not yet been used on the Internet. This enables a user to permit or deny access on a control-by-control basis. For more information about this and other new features see the Windows Internet Explorer 7 features page.

I am running Internet Explorer on Windows Server 2003. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone. See the FAQ section of this security update for more information about Internet Explorer Enhanced Security Configuration.

What is Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or administrator downloading and running malicious Web content on a server. Internet Explorer Enhanced Security Configuration reduces this threat by modifying numerous security-related settings, including Security and Advanced tab settings in Internet Options. Some of the key modifications include:

Security level for the Internet zone is set to High. This setting disables scripts, ActiveX components, Microsoft virtual machine (Microsoft VM) HTML content, and file downloads.

Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.

Install on Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.

Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, please consult the Managing Internet Explorer Enhanced Security Configuration guide, which can be found at the following Web site.

What does the update do?
The update removes the vulnerability by modifying the way that the WMI Object Broker instantiates other controls.

When this security bulletin was issued, had this vulnerability been publicly disclosed?

Yes. This vulnerability has been publicly disclosed. It has been assigned Common Vulnerability and Exposure number CVE-2006-4704.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
Yes. This security update addresses the vulnerability that is currently being exploited. The vulnerability that has been addressed has been assigned the Common Vulnerability and Exposure number CVE-2006-4704.

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

TippingPoint and the Zero Day Initiative, for originally reporting the WMI Object Broker Vulnerability - CVE-2006-4704.

Disclaimer:

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions:

V1.0 (December 12, 2006): Bulletin published.