Lucene search

K
securityvulnsSecurityvulnsSECURITYVULNS:DOC:20342
HistoryAug 12, 2008 - 12:00 a.m.

Microsoft Security Bulletin MS08-050 – Important Vulnerability in Windows Messenger Could Allow Information Disclosure (955702)

2008-08-1200:00:00
vulners.com
30

Microsoft Security Bulletin MS08-050 – Important
Vulnerability in Windows Messenger Could Allow Information Disclosure (955702)
Published: August 12, 2008

Version: 1.0
General Information
Executive Summary

This security update resolves a publicly reported vulnerability in supported versions of Windows Messenger. As a result of this vulnerability, scripting of an ActiveX control could allow information disclosure in the context of the logged-on user. An attacker could change state, get contact information, and initiate audio and video chat sessions without the knowledge of the logged-on user. An attacker could also capture the user’s logon ID and remotely log on to the user’s Messenger client impersonating that user.

This security update is rated Important for all supported editions of Microsoft Windows 2000 and Windows XP, and Moderate for all supported versions of Windows Server 2003. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The security update addresses the vulnerability by locking the ActiveX control so that only authorized applications have access to the control. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information

Recommendation. Microsoft recommends that customers apply the update at the earliest opportunity.

Known Issues. None
Top of sectionTop of section
Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Affected Software
Operating System Component Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
Windows Messenger 4.7

Windows XP Service Pack 2 and Windows XP Service Pack 3

Windows Messenger 4.7
(KB946648)

Information Disclosure

Important

None

Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2

Windows Messenger 4.7
(KB946648)

Information Disclosure

Important

None

Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2

Windows Messenger 4.7
(KB954723)

Information Disclosure

Moderate

None

Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2

Windows Messenger 4.7
(KB954723)

Information Disclosure

Moderate

None

Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems

Windows Messenger 4.7
(KB954723)

Information Disclosure

Moderate

None
Windows Messenger 5.1

Microsoft Windows 2000 Service Pack 4

Windows Messenger 5.1
(KB899283)

Information Disclosure

Important

None

Windows XP Service Pack 2 and Windows XP Service Pack 3

Windows Messenger 5.1
(KB899283)

Information Disclosure

Important

None

Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2

Windows Messenger 5.1
(KB899283)

Information Disclosure

Important

None

Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2

Windows Messenger 5.1
(KB899283)

Information Disclosure

Moderate

None

Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2

Windows Messenger 5.1
(KB899283)

Information Disclosure

Moderate

None

Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems

Windows Messenger 5.1
(KB899283)

Information Disclosure

Moderate

None

Non-Affected Software
Operating System

Windows Vista and Windows Vista Service Pack 1

Windows Vista x64 Edition and Windows Vista x64 Edition Service Pack 1

Windows Server 2008 for 32-bit Systems

Windows Server 2008 for x64-based Systems

Windows Server 2008 for Itanium-based Systems
Top of sectionTop of section

Frequently Asked Questions (FAQ) Related to This Security Update

Where are the file information details?
The file information details can be found in Microsoft Knowledge Base Article 955702.

Are other Microsoft Real-Time Collaboration applications, such as Office Communicator, affected by this vulnerability?
No. Other messaging applications are not affected as they do not contain the vulnerable component.

Why is the update for Windows Messenger 4.7 on Windows XP available from Windows Update while the update for Windows Messenger 4.7 on Windows Server 2003 is only available from Download Center?
As with all other components of Windows XP, Windows Messenger 4.7 is delivered with Windows XP. Therefore, this update is available from Windows Update for installation on Windows XP. However, Windows Messenger 4.7 is not delivered with Windows Server 2003, although Windows Messenger 4.7 may be installed optionally on Windows Server 2003. Therefore, Windows Messenger 4.7 is available from Download Center for optional installation on Windows Server 2003. This has been explained in the End User License Agreement for Windows Messenger 4.7 on Windows Server 2003.

How do I check whether the update for Windows Messenger 4.7 has been installed on my system that is running Windows Server 2003?
To verify that an affected version of Windows Messenger 4.7 is running on your Windows Server 2003 system, check that the file version of msgsc.dll starts with 4.7. For supported 32-bit editions of Windows Server 2003, this file is in the path, %ProgramFiles%\messenger\msgsc.dll. For supported x64-based editions of Windows Server 2003, this file is in the path, %ProgramFilesx86%\messenger\msgsc.dll. If the affected version is not running on your Windows Server 2003 system, the update for Windows Messenger 4.7 will not install on your system.

Why is an update for Windows Messenger 4.7 not available for Microsoft Windows 2000?
Windows Messenger 4.7 is not supported on Microsoft Windows 2000. Because of this, no deployment packages are available for Microsoft Windows 2000. However, Windows Messenger 5.1 is supported on Microsoft Windows 2000 and is available from Download Center.

Why is Windows Messenger 5.1 not available from Windows Update?
Windows Messenger 5.1 is available only as an optional component from Download Center. To obtain the latest version of Windows Messenger 5.1, visit Windows Messenger 5.1. See also Microsoft Knowledge Base Article 899283.
Top of sectionTop of section
Vulnerability Information

Severity Ratings and Vulnerability Identifiers
Vulnerability Severity Rating and Maximum Security Impact by Affected Software
Affected Software Messenger Information Disclosure Vulnerability - CVE-2008-0082 Aggregate Severity Rating
Windows Messenger 4.7

Windows Messenger 4.7 on Windows XP Service Pack 2 and Windows XP Service Pack 3

Important
Information Disclosure

Important

Windows Messenger 4.7 on Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2

Important
Information Disclosure

Important

Windows Messenger 4.7 on Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2

Moderate
Information Disclosure

Moderate

Windows Messenger 4.7 on Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2

Moderate
Information Disclosure

Moderate

Windows Messenger 4.7 on Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems

Moderate
Information Disclosure

Moderate
Windows Messenger 5.1

Windows Messenger 5.1 on Microsoft Windows 2000 Service Pack 4

Important
Information Disclosure

Important

Windows Messenger 5.1 on Windows XP Service Pack 2 and Windows XP Service Pack 3

Important
Information Disclosure

Important

Windows Messenger 5.1 on Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2

Important
Information Disclosure

Important

Windows Messenger 5.1 on Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2

Moderate
Information Disclosure

Moderate

Windows Messenger 5.1 on Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2

Moderate
Information Disclosure

Moderate

Windows Messenger 5.1 on Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems

Moderate
Information Disclosure

Moderate
Top of sectionTop of section

Messenger Information Disclosure Vulnerability - CVE-2008-0082

An information disclosure vulnerability exists in supported versions of Windows Messenger. Scripting of a particular ActiveX control, Messenger.UIAutomation.1, could allow information disclosure from these programs in the context of the logged-on user. An attacker could change state, get contact information, and initiate audio and video chat sessions without the knowledge of the logged-on user. An attacker could also capture the user’s logon ID and remotely log on to the user’s Messenger client as that user.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2008-0082.

Mitigating Factors for Messenger Information Disclosure Vulnerability - CVE-2008-0082

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

By default, this ActiveX control, Messenger.UIAutomation.1, is not included in the default allow-list for ActiveX controls in Internet Explorer 7. Only customers who have explicitly approved this control by using the ActiveX opt-in feature are at risk to attempts to exploit this vulnerability. However, if a customer has used this ActiveX control in a previous version of Internet Explorer, then this ActiveX control is enabled to work in Internet Explorer 7, even if the customer has not explicitly approved it using the ActiveX opt-in feature.

Supported versions of Microsoft Windows 2000, Windows Server 2003, and Windows Server 2003 for Itanium-based Systems do not ship with the affected versions of Windows Messenger. Therefore, only customers who have installed the affected versions of Windows Messenger on these systems are at risk from this vulnerability.

Supported versions of Windows Vista ship with Windows Live Messenger but are not vulnerable. Therefore, upgrading to supported versions of Windows Vista and Windows Live Messenger is a mitigating factor.

An attacker who successfully exploited this vulnerability could gain the same privileges as the logged-on user on Windows Messenger. An attacker could also capture the user’s logon ID and remotely log on to the user’s Messenger client as that user. However, the attacker could not gain the logon ID or credentials of the user on the user’s computer system.

In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker’s Web site.

By default, all supported versions of Microsoft Outlook and Microsoft Outlook Express open HTML e-mail messages in the Restricted sites zone. The Restricted sites zone helps reduce attacks that could try to exploit this vulnerability, by preventing Active Scripting and ActiveX controls from being used when reading HTML e-mail. However, if a user clicks on a link within an e-mail they could still be vulnerable to this issue through the Web-based attack scenario.

By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that you have not added to the Internet Explorer Trusted sites zone. See the FAQ subsection of this vulnerability section for more information about Internet Explorer Enhanced Security Configuration.
Top of sectionTop of section

Workarounds for Messenger Information Disclosure Vulnerability - CVE-2008-0082

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

Configure Internet Explorer to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone

You can help protect against this vulnerability by changing your settings to prompt before running Active Scripting or to disable Active Scripting in the Internet and Local intranet security zone. To do this, follow these steps:

In Internet Explorer, click Internet Options on the Tools menu.

Click the Security tab.

Click Internet, and then click Custom Level.

Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

Click Local intranet, and then click Custom Level.

Under Settings, in the Scripting section, under Active Scripting, click Prompt or Disable, and then click OK.

Click OK two times to return to Internet Explorer.

Note Disabling Active Scripting in the Internet and Local intranet security zones may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly.

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

Repeat these steps for each site that you want to add to the zone.

Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Impact of Workaround: There are side effects to prompting before running Active Scripting. Many Web sites that are on the Internet or on an intranet use Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use Active Scripting to provide menus, ordering forms, or even account statements. Prompting before running Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Set Internet and Local intranet security zone settings to “High” to prompt before running ActiveX Controls and Active Scripting in these zones

You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls and Active Scripting. You can do this by setting your browser security to High.

To raise the browsing security level in Internet Explorer, follow these steps:

On the Internet Explorer Tools menu, click Internet Options.

In the Internet Options dialog box, click the Security tab, and then click the Internet icon.

Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.

Note If no slider is visible, click Default Level, and then move the slider to High.

Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.

Add sites that you trust to the Internet Explorer Trusted sites zone

After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.

To do this, follow these steps:

In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.

In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.

If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.

In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.

Repeat these steps for each site that you want to add to the zone.

Click OK two times to accept the changes and return to Internet Explorer.

Note Add any sites that you trust not to take malicious action on your system. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.

Impact of Workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone”.

Set the killbit for the Messenger.UIAutomation.1 control

You can disable attempts to exploit this vulnerability by setting the kill bit for the control in the registry.

Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use the Registry Editor at your own risk. For information about how to edit the registry, view the "Changing Keys And Values" Help topic in Registry Editor (Regedit.exe) or view the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe.

Note We recommend backing up the registry before you edit it.

To set the kill bit for a CLSID with a value of {B69003B3-C55E-4b48-836C-BC5946FC3B28}, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{B69003B3-C55E-4b48-836C-BC5946FC3B28}]

"Compatibility Flags"=dword:00000400

You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:

Group Policy Collection

What is Group Policy Object Editor?

Core Group Policy Tools and Settings

Impact of workaround. Scripting is disabled for this particular ActiveX control. This will disable Remote Access features from functioning with Messenger.

How to undo the workaround. You can return your system to its original state by performing the following:

Paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{B69003B3-C55E-4b48-836C-BC5946FC3B28}]
Top of sectionTop of section

FAQ for Messenger Information Disclosure Vulnerability - CVE-2008-0082

What is the scope of the vulnerability?
This is an information disclosure vulnerability. An attacker who successfully exploited this vulnerability could gain the privileges of the logged-on user on Windows Messenger. An attacker could also capture the user’s logon ID and remotely log on to the user’s Messenger client as that user.

What causes the vulnerability?
The vulnerability is caused by an ActiveX control, Messenger.UIAutomation.1, that is marked safe, allowing developers to script this control.

What is the ActiveX opt-in feature in Windows Internet Explorer 7?
Windows Internet Explorer 7 includes an ActiveX opt-in feature, which means that nearly all pre-installed ActiveX controls are off by default. Users are prompted by the Information Bar before they can instantiate a previously installed ActiveX control that has not yet been used on the Internet. This enables a user to permit or deny access on a control-by-control basis. For more information about this and other new features, see the Windows Internet Explorer 7 features page.

I am running Internet Explorer on Windows Server 2003. Does this mitigate this vulnerability?
Yes. By default, Internet Explorer on Windows Server 2003 runs in a restricted mode that is known as Enhanced Security Configuration. This mode sets the security level for the Internet zone to High. This is a mitigating factor for Web sites that have not been added to Internet Explorer Trusted sites zone.

What is the Internet Explorer Enhanced Security Configuration?
Internet Explorer Enhanced Security Configuration is a group of preconfigured Internet Explorer settings that reduce the likelihood of a user or of an administrator downloading and running specially crafted Web content on a server. Internet Explorer Enhanced Security Configuration reduces this risk by modifying many security-related settings. This includes the settings on the Security tab and the Advanced tab in the Internet Options dialog box. Some of the important modifications include the following:

Security level for the Internet zone is set to High. This setting disables scripts, ActiveX controls, Microsoft Java Virtual Machine (MSJVM), and file downloads.

Automatic detection of intranet sites is disabled. This setting assigns all intranet Web sites and all Universal Naming Convention (UNC) paths that are not explicitly listed in the Local intranet zone to the Internet zone.

Install On Demand and non-Microsoft browser extensions are disabled. This setting prevents Web pages from automatically installing components and prevents non-Microsoft extensions from running.

Multimedia content is disabled. This setting prevents music, animations, and video clips from running.

For more information regarding Internet Explorer Enhanced Security Configuration, see the guide, Managing Internet Explorer Enhanced Security Configuration.

What is a kill bit?
A security feature in Microsoft Internet Explorer makes it possible to prevent an ActiveX control from ever being loaded by the Internet Explorer HTML-rendering engine. This is done by a making a registry setting and is referred to as setting the kill bit. After the kill bit is set, the control can never be loaded, even when it is fully installed. Setting the kill bit makes sure that even if a vulnerable component is introduced or is re-introduced to a system, it remains inert and harmless. For more information on kill bits, see Microsoft Knowledge Base Article 240797: How to stop an ActiveX control from running in Internet Explorer.

Are MSN Messenger and Windows Live Messenger affected by this issue?
MSN Messenger and Windows Live Messenger are not directly affected by this vulnerability; however users are still vulnerable if they have the affected version of Windows Messenger installed alongside MSN Messenger or Windows Live Messenger on their system. The update for Windows Messenger will secure the system from this issue whether or not MSN Messenger or Windows Live Messenger are installed on the system. Therefore, no new versions of MSN Messenger or Windows Live Messenger are included in the update.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could change state, get contact information, and initiate audio and video chat sessions without the knowledge of the logged-on user on Windows Messenger. An attacker could also capture the user’s logon ID and remotely log on to the user’s Messenger client as that user.

How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to visit the Web site. This could also include compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger message that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.

What systems are primarily at risk from the vulnerability?
All systems that have supported versions of Windows Messenger installed are at risk from this vulnerability, especially workstations and terminal server platforms.

What does the update do?
The update removes the vulnerability by locking the ActiveX control so that only authorized applications as listed on a white list have access to the control. Refer to Microsoft Knowledge Base Article 946648 for more information regarding this list of applications.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
Yes. This vulnerability had been publicly disclosed when this security bulletin was originally issued. It has been assigned the Common Vulnerability and Exposure number CVE-2008-0082.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.

Other Information
Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

Haifei Li of Fortinet’s FortiGuard Global Security Research Team for reporting the Windows Messenger Information Disclosure Vulnerability (CVE-2008-0082)
Top of sectionTop of section
Support

Customers in the U.S. and Canada can receive technical support from Microsoft Product Support Services at 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates.

International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

V1.0 (August 12, 2008): Bulletin published.

Related for SECURITYVULNS:DOC:20342